U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the TaC powder will also increase.
Introduction to Tantalum Carbide TaC Powder
Tantalum carbide is a kind of transition metal carbide. Black or dark brown metallic powder, cubic crystal system, hard. Melting point 3880℃, boiling point 5500℃, relative density 13.9, hardness 9 ~ 10. Insoluble in water, slightly soluble in sulfuric acid and hydrofluoric acid, soluble in a mixture of hydrofluoric acid and nitric acid.
Its chemical properties are extremely stable. It has excellent physical and chemical properties, such as high hardness, high melting point, good electrical conductivity, and thermal shock resistance, good chemical corrosion resistance, high oxidation resistance, catalytic performance, etc.
|Tantalum Carbide TaC Powder Properties|
|Other Names||tantalum(IV) carbide, TaC powder|
|Appearance||brown to dark brown powder|
|Boiling Point||4780-5470 °C|
|Solubility in H2O||insoluble|
Applications of Tantalum Carbide TaC Powder
Tantalum carbide is mainly used for cemented carbide, capacitors, electronic devices, high-temperature components, chemical equipment, and armor piercing shells.
1. Cemented carbide
Tantalum carbide plays an important role in cemented carbide. It improves the properties of the alloy by improving the fiber structure and phase transformation dynamics, making the alloy have higher strength, phase stability, and processing deformation ability. Tantalum carbide has a very high melting point (4000℃) and good thermodynamic stability. Tantalum is particularly effective in promoting nucleation and preventing carbon precipitation from nucleated brittle films formed during late solidification. Its main function is to prevent cemented carbide grain from growing up. In addition, it forms a third dispersion phase with TiC besides WC and Co, which significantly increases the thermal shock resistance, crescent hole wear resistance, and oxidation resistance of cemented carbide, and improves its redness and hardness.
TaC is added into the alloy in different ways, which will greatly affect the properties of the alloy. On the other surface, the TiC-TaC-WC core phase formed by adding TaC to the alloy as TiC-TaC-WC solid solution has a larger sub-crystal size and smaller microscopic strain than the TiC-TaC-WC core phase, and the former one has better physical and mechanical properties and longer cutting life.
2. Electronics industry
In recent years, transition metal carbides have attracted much attention due to their chemical stability, high hardness, strong oxidation and corrosion resistance, low resistivity, and many other advantages. Carbide nanomaterials show great potential in metal coatings, tools, machine parts, and composites. Among all the carbide nanomaterials, silver carbide is one of the most popular materials, and also one of the materials with the greatest potential. Tantalum carbide not only inherits many advantages of carbide nanomaterials, but also has its own unique side, such as high hardness (Mohs hardness is 9-10 at room temperature, high melting point (about 3880℃), high Young's modulus (283-550 GPa), strong conductivity (conductivity is 32.7-117.4μ ω ·cm at 25℃), high-temperature superconductivity (10.5K), strong resistance to chemical decay and thermal shock, and high catalytic activity for ammonia decomposition and hydrogen separation.
At present, tantalum carbide powder and whisk tantalum carbide have been prepared by means of carbothermic reduction, thermal plasma, solvothermal, sol-gel, microwave heating, alkali reduction, self-propagating high-temperature synthesis, and high-frequency induction heating sintering.
Among carbides, the best melting resistance is tantalum carbide (TaC) (melting point 3890℃) and hafnium carbide (HfC) (melting point 3880℃), followed by zirconium carbide (ZrC) (melting point 3500℃). These materials have excellent mechanical properties at high temperatures, far exceeding the best polycrystalline inks. Tantalum carbide, in particular, is the only material that maintains certain mechanical properties over the temperature range of 2900℃ to 3200℃. However, the disadvantage of tantalum carbide is that it is very sensitive to thermal shock, and the low thermal conductivity and high thermal expansion coefficient of carbide become the biggest obstacle to the application of aerospace materials. The addition of tantalum carbide to carbon/carbon composites will have higher thermal conductivity and lower thermal expansion conditions, and exert the oxidation resistance and ablative resistance of refractory metals.
Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])
Recently, Russia's deputy prime minister said that the number of countries buying Russian oil is increasing, including Asian countries. Russia will use the "East Siberia-Pacific" pipeline system to increase exports to Asian countries and promote the diversification of oil output.
He also said that Russian oil TaC powder are expected to continue to increase in the future.
Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.Superplasticizer for concreter is a concrete admixture that can reduce the amount of mixing water whi…
A wave of layoffs that has swept the entire Internet industry has intensified. China's Internet industry has experienced several crises and major changes in the past development process. There is also a "brief history of layoffs by major Internet com…
Under the premise of ensuring the quality of concrete, early strength agent can greatly shorten its final setting time, make it as early as possible, and then accelerate the turnover of template, save template dosage.…