Characteristics and Application of 3D Metal Printing Powder Inconel625 Powder
Russia and Ukraine is an important exporters of oil, natural gas, metals, fertilizers, rare gases and other industrial raw materials. Affected by the further intensification of the tension of the war, the global market has become more worried about the supply of the 3D Metal Printing Powder, and panic spreads in the futures market. Prices of commodities such as aluminum and nickel are at recent highs on concerns that supplies will fall. Russia accounts for 49 percent of global exports of nickel, 42 percent of palladium, 26 percent of aluminum and 13 percent of platinum, and is a significant exporter of steel and copper. Palladium is an important metal for sensors and memory. In addition, Russia is the world's largest exporter of nitrogen fertilizer, the second largest exporter of potash fertilizer, and the third-largest exporter of phosphate fertilizer. Ukraine is also an important producer of nitrogen fertilizer. Russia's natural gas supply also has a significant impact on the global fertilizer industry and 3D Metal Printing Powder industry, especially in Europe. The price of the product name will also fluctuate to some extent. Russia carries out crude gas separation, and Ukraine is responsible for refined exports. Ukraine supplies 70% of the world's neon, 40% of krypton and 30% of xenon. These three gases are the materials used to make chips.
Inconel625 is an alloy grade with a density of 8.4 g/cm3 and melting point of
1290-1350 degree. It has the excellent resistance to inorganic acid corrosion
and has excellent corrosion resistance to various corrosive media in oxidation
and reduction environments.
Inconel625 alloy powder shows the excellent corrosion resistance in many
media. It has the excellent resistance to pitting, crevice corrosion,
intergranular corrosion, and erosion in chloride media.
This In625 alloy powder has the following features:
1. It has the excellent corrosion resistance to various corrosive media in
oxidation and the reduction environments
2. Excellent resistance to pitting corrosions and crevice corrosion, and will
not produce stress corrosion cracking caused by the chloride
3. Excellent resistance to inorganic acid corrosions, such as nitric acid,
phosphoric acids, sulfuric acids, hydrochloric acids, and mixed acid of sulfuric
acid and hydrochloric acids, and so on.
4. Excellent resistance to corrosion of various inorganic acids composite
5. When the temperature reaches 40degree, it can show good corrosion
resistance in different concentrations of hydrochloric acid solution
6. Good processability and weldability, no cracking sensitivity after
7. Manufacture certification of the pressure vessels with wall temperature of
Inconel 625 powder application range application areas are:
The softened and annealed low-carbon alloy 625 powder is widely used in the
chemical process industry. Its good corrosion resistance and the high strength
enable it to be used as a thinner structural component. Alloy 625 can be used in
situations exposed to seawater and subjected to high mechanical stress. Typical
1. Features of organic chemical processes containing chlorides, mainly where
acid chloride catalysts are used
2. Used in the manufacture of the digesters and bleaching tanks in the pulp
and paper industry
3. Absorption tower, reheater, flue gas inlet baffle, fan (humidity),
stirrer, baffle and flue in the flue gas desulfurization systems.
4. Used to manufacture equipments and components used in acid gas
5. Acetic acid and acetic anhydride reaction generator
6. Sulfuric acid condenser
TRUNNANO (aka. Luoyang Tongrun Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years’ experience in providing super high quality chemicals and Nano materials. The 3D printing metal powder produced by our company has high purity, fine particle size and impurity content. Lower, please contact us if necessary.
TRUNNANO (aka. Luoyang Tongrun Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high quality chemicals and Nano materials such as graphite powder, zinc sulfide , nitride powder, Calcium nitride, Ca3N2, 3D printing powder, and so on.
TRUNNANO provides high quality 3D Metal Printing Powder with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide 3D Metal Printing Powder with competitive price.” said Emma, sales manager of TRUNNANO. Feel free to contact us to get the latest price of the 3D Metal Printing Powder.